Trinity Poly Uyo Electrical/Electronic Engineering Technology Cut-Off Mark 2027/2028

The Trinity Poly Electrical/Electronic Engineering Technology cut off mark is JAMB’s polytechnic minimum of 100; no departmental figure is published. See the safe target, subject combination, O’level, screening and CAPS steps for 2027/2028.

The Trinity Poly Electrical/Electronic Engineering Technology cut off mark is 100 in the UTME, the national minimum JAMB set for polytechnics for 2026/2027. Trinity Polytechnic, Uyo, a private polytechnic in Akwa Ibom State, has not published a departmental cut-off for Electrical/Electronic Engineering Technology in any year I could trace. The course appears on JAMB’s list for the school as “Electrical / Electronics Engineering Technology”, so ND admission runs through the UTME and JAMB CAPS.

2027/2028 update: Trinity Poly cut-off marks usually stay the same from one year to the next, so the figures on this page are what 2027/2028 candidates should plan with. They are based on JAMB’s 2026 national minimum, because Trinity Poly has not published its own course cut-offs. If the 2027/2028 notice changes anything, we will update this page.

NBTE’s 2020 Directory lists it as a private polytechnic (serial number 129) at Mbak Road, Ita Itai, Uyo LGA, P.M.B. 3997, Uyo, approved in 2016. The last admission advert I could find is the 2023/2024 ND/HND advert reprinted by Myschool on 28 June 2023. It pointed to an admission page on trinitypoly.edu.ng that Myschool itself flagged as not existing at the time. I found no 2026/2027 notice, fee list or screening timetable. It has no link to Trinity University in Lagos. So this page sticks to what JAMB and NBTE publish, gives you my safe target score, and tells you what to ask the school.


Trinity Poly Electrical/Electronic Engineering Technology cut off mark at a glance

ItemPositionStatus
JAMB minimum UTME score for polytechnics100Official (JAMB 2026 policy meeting, reported by NAN on 11 May 2026)
Trinity Poly departmental cut-off for Electrical/Electronic Engineering TechnologyNot publishedNo figure found for any year
My safe target for the 2027 UTME125 or moreMy advice, not a school rule
Name on JAMB’s listElectrical / Electronics Engineering TechnologyMyschool reprint of JAMB’s course list, checked 3 November 2026
Programme levelNational Diploma (ND), full timeND entry is through the UTME and CAPS
UTME subjects besides EnglishMathematics, Physics and ChemistryJAMB polytechnic brochure
Programme accreditationNot confirmedAsk the department for its NBTE status
JAMB deadline for 2026/2027 polytechnic admissions31 December 2026Official (NAN, 11 May 2026); runs until 31 December 2026

Trinity Poly cut-off mark history for Electrical/Electronic Engineering Technology

SessionFigureWhat it isStatus
2026/2027100JAMB national minimum for polytechnics and monotechnicsOfficial
2025/2026100JAMB national minimum for polytechnicsOfficial (reported by Nairametrics, 8 July 2025)
Any yearNoneTrinity Poly figure for Electrical/Electronic Engineering TechnologyNever published in any source I found

JAMB kept the polytechnic floor at 100 for two sessions running. A polytechnic may set a higher mark of its own, but Trinity Poly has never announced one that I could find, and it does not publish merit lists with scores. So 100 is the legal minimum, and anything above it improves your position.

Safe target score for Electrical/Electronic Engineering Technology (my advice)

These bands are my judgement as an admissions adviser, based on how small private polytechnic courses tend to fill. Electrical/Electronic Engineering Technology is a steady engineering course with fair competition.

Your UTME scoreMy read for ND Electrical/Electronic Engineering Technology at Trinity Poly
Below 100Not eligible for any ND course this session
100 to 109Eligible, but borderline; confirm the course has space
110 to 124Fair chance if your O’level is strong
125 to 149Good chance
150 and aboveVery strong for this course

For the 2027 UTME I would aim for 125 or more. If you land between 100 and that figure, still apply: at a small private polytechnic your O’level grades, your subject combination and the screening will carry a lot of weight.


Electrical/Electronic Engineering Technology subject combination and O’level requirements at Trinity Poly

Use of English is compulsory for every UTME candidate, so JAMB’s brochure lists only your other three subjects. I read the Electrical/Electronic Engineering Technology page on Myschool’s reprint of JAMB’s polytechnic brochure on 3 November 2026. None of its remarks names Trinity Poly, so the base rule applies.

RequirementWhat it saysSource
UTME subjects (base rule)Use of English, plus Mathematics, Physics and ChemistryJAMB polytechnic brochure
O’level (base rule)Mathematics, Physics and Chemistry, plus two from Biology or Agricultural Science, Technical Drawing, Basic Electronics or Basic Electricity, Auto Mechanics, Metal Work, Woodwork, Further Mathematics, English Language, Geography and Economics or Commerce. The standard NBTE ND rule also requires a credit in English Language, so make English one of the twoJAMB polytechnic brochure
My recommended UTME setEnglish, Mathematics, Physics and ChemistryMy advice

My recommendation is English, Mathematics, Physics and Chemistry. All three subjects are fixed in the base line, so there is nothing to choose.

O’level: Plan for five credits in no more than two sittings; the school has published nothing on sittings, and two is the usual polytechnic limit. Awaiting-result candidates can sit the UTME, but CAPS cannot offer you admission until your result is uploaded, so have it on the portal before the school’s list is processed.

Direct Entry and the HND route

There is no Direct Entry into the first year of an ND, and JAMB’s brochure leaves the Direct Entry section blank for this course. The 2023/2024 advert did not separate ND from HND, but it listed options such as Microbiology, Biochemistry, Industrial Chemistry, Environmental Biology, Physics with Electronics, Power and Machines, and Electronics and Telecommunication, which are normally HND options. Under the standard NBTE rule, an HND needs an ND (usually Lower Credit or better) plus a year of industrial attachment, and you apply to the polytechnic directly, outside CAPS.


How admission screening works at Trinity Poly

DetailWhat is knownStatus
Who can applyCandidates who chose Trinity Poly in the UTME and scored at least 100JAMB rule
2026/2027 admission noticeNot foundNo official notice online
Form price and paymentNot publishedAsk the admissions office
Test or interviewNot publishedAsk the admissions office
Ranking formulaNot publishedUnknown
Last advert found2023/2024 ND/HND advertMyschool reprint, 28 June 2023

Small Nigerian polytechnics usually sell a form, check documents and sometimes run a short written test or interview. Trinity Poly has not said which it does. Ask the office these questions before you pay anything:

  • Is Electrical/Electronic Engineering Technology admitting new ND students for 2027/2028, and does the programme have NBTE accreditation?
  • How much is the form, where do I pay, and when do sales close?
  • Is there a written test or interview, and on which subjects?
  • What are the acceptance fee and first-year fees, and is there a hostel?

Worked example for an ND Electrical/Electronic Engineering Technology applicant (illustrative)

Take Otobong, who wants Electrical/Electronic Engineering Technology at Trinity Poly. Otobong scored 129 in English, Mathematics, Physics and Chemistry, and has credits in English, Mathematics, Physics, Chemistry and Basic Electricity from one sitting.

  1. JAMB minimum: 129 minus 100 = 29. Otobong is eligible.
  2. My safe target: 129 against 125 is 4 above it.
  3. UTME subjects: they match the line in the table above.
  4. O’level: five credits that cover the compulsory subjects for Electrical/Electronic Engineering Technology.

If Trinity Poly used a 50:50 ranking, 129 divided by 8 gives 16.125 out of 50, and a screening score of 30 out of 50 would bring the total to 46.125. That formula is only an illustration of how such rankings work. Trinity Poly has not published one, and many small polytechnics simply admit everyone who qualifies.


Your chances of getting Electrical/Electronic Engineering Technology at Trinity Poly

  • If you meet the subject rules and score 100 or more, your biggest risk is that the course may not be running this year. Confirm that first.
  • Electrical/Electronic Engineering Technology is a steady engineering course with fair competition, so a score near my target of 125 gives you room if the department has more applicants than places.
  • Candidates from Uyo, Itu, Uruan, Ibesikpo Asutan and Nsit Ibom save on transport and rent by studying close to home, which adds up over a two-year ND.
  • JAMB told polytechnics to finish 2026/2027 admissions by 31 December 2026, so offers for current candidates can come late. Keep checking CAPS until then.

How to apply for Electrical/Electronic Engineering Technology at Trinity Poly, step by step

  1. Get your JAMB profile code: text NIN, a space and your 11-digit NIN to 55019 or 66019 from the phone line linked to your NIN.
  2. Register the UTME correctly: choose Electrical/Electronic Engineering Technology with English, Mathematics, Physics and Chemistry, and pick Trinity Polytechnic as your polytechnic.
  3. Fix your choice if needed: if Trinity Poly was not your choice, do a JAMB change of institution before screening. To move into Electrical/Electronic Engineering Technology from another course, see JAMB change of course.
  4. Upload your O’level to CAPS: visit an accredited JAMB CBT centre once your WAEC, NECO or NABTEB result is out.
  5. Contact the polytechnic: visit the campus on Mbak Road, Ita Itai, Uyo, confirm that your course is admitting this year, and pay only through the channel the school names.
  6. Attend screening: take your UTME result slip, O’level result, birth certificate or age declaration, local government identification and passport photographs.
  7. Accept on CAPS: log in at efacility.jamb.gov.ng, open Check Admission Status, then Access my CAPS, and accept. Our JAMB CAPS guide explains each status.
  8. Pay acceptance and register: get the amounts from the bursary in writing, pay through the channel the school names, then complete medical and departmental registration.

Warning

Trinity Poly’s admission web page was not working when its last advert was reprinted, so be careful with any site or agent selling its forms. Confirm on campus, and remember that JAMB treats any admission outside CAPS as illegal.

Still preparing for the exam? Read when JAMB 2027 registration starts and, when results are out, how to check your JAMB result.


Studying Electrical/Electronic Engineering Technology at Trinity Poly

The school has not published its faculty structure, so I do not name the school or department this course sits in. Trinity Poly has not published a course outline, so the list below is the usual NBTE pattern for ND Electrical/Electronic Engineering Technology in Nigerian polytechnics.

What you study

  • Electrical circuit theory and electrical machines
  • Electronics and digital systems
  • Power generation, transmission and installation
  • Electrical measurement and instrumentation
  • Workshop practice, wiring and technical drawing
  • Applied mathematics and engineering science
  • SIWES placement and general studies

Duration and accreditation

Under the standard NBTE structure, the ND runs for two years full time, with a SIWES placement. Students who want the HND then do a one-year industrial attachment before applying, and the HND usually asks for an ND at Lower Credit or above. Trinity Poly is in NBTE’s 2020 Directory (private, approved 2016), which confirms the school itself. I could not confirm the NBTE status of ND Electrical/Electronic Engineering Technology specifically. That matters: an ND from a programme NBTE has not accredited can cause problems when you apply for an HND or a job. Ask the department for its accreditation letter before you pay fees.

Careers after the ND

  • Electrical installer and wiring technician
  • Maintenance technician in factories, hotels and hospitals
  • Solar and inverter installer
  • Field technician with power distribution and telecom firms
  • Electronics repair business
  • HND in Power and Machines or Electronics and Telecommunications

To compare the same course at other Akwa Ibom polytechnics, see the Federal Poly Ukana cut-off mark for Electrical/Electronic Engineering and the Akwa Ibom Poly cut-off mark for Electrical/Electronic Engineering.

For revision, start with the JAMB Chemistry syllabus.


Mistakes that cost Electrical/Electronic Engineering Technology applicants

  • Biology instead of Chemistry: the base UTME line fixes Chemistry.
  • Treating English as optional: it sits on the optional O’level list in the base rule, but almost every school asks for it in practice.
  • Ignoring Physics: it carries the whole ND, and a weak grade shows.
  • Searching the wrong name: JAMB lists the course as Electrical / Electronics Engineering Technology.
  • No O’level on CAPS: JAMB cannot approve an offer until your result is uploaded.

Trinity Poly Electrical/Electronic Engineering Technology: frequently asked questions

What subjects do I need for Electrical Engineering in Trinity Poly? Use of English, Mathematics, Physics and Chemistry in the UTME, plus O’level credits in Mathematics, Physics, Chemistry and two more, one of which must be English Language.

Is 115 enough for Electrical/Electronic Engineering Technology at Trinity Poly? It clears JAMB’s minimum of 100, and Trinity Poly has published no higher figure. It is a little below my safe target of 125, so a strong O’level result and a good screening will matter.

Can I study Electrical/Electronic Engineering at Trinity Poly with Biology instead of Chemistry? Not under the base rule. JAMB’s line fixes Mathematics, Physics and Chemistry; the only Biology exception on the brochure page is for another polytechnic.

Is Electrical/Electronic Engineering Technology at Trinity Poly accredited? Trinity Poly itself is in NBTE’s 2020 Directory (private, approved 2016). I could not confirm the accreditation of ND Electrical/Electronic Engineering Technology specifically, so ask the department for its NBTE letter before you pay fees.


Sources and updates

The 2026/2027 polytechnic minimum of 100, the 31 December 2026 deadline and JAMB’s warning against admissions outside CAPS come from JAMB’s 2026 policy meeting as reported by the News Agency of Nigeria on 11 May 2026; the 2025/2026 figure of 100 is from Nairametrics (8 July 2025). The course name is from the Myschool reprint of JAMB’s course list for the school. JAMB’s subject and O’level rules are from Myschool’s reprint of the JAMB polytechnic brochure page for Electrical/Electronic Engineering Technology, which I checked on 3 November 2026. The address and approval year are from NBTE’s 2020 Directory of Accredited Programmes (serial number 129). The 2023/2024 advert is from Myschool’s reprint of 28 June 2023. The safe target, the worked example and the ranking illustration are my own advice. Checked on 3 November 2026; this page will be updated when Trinity Poly publishes a 2027/2028 notice.

0 Shares:

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like