Abia Poly Quantity Surveying Cut-Off Mark 2027/2028 and Admission Requirements

The Abia Poly Quantity Surveying cut off mark is JAMB’s polytechnic minimum of 100; no departmental figure is published. See the safe target score, UTME subjects, O’level rules, screening and CAPS steps.

The Abia Poly Quantity Surveying cut off mark 2027 candidates should plan with is 100 in the UTME. That is the national minimum JAMB set for polytechnics for 2026/2027. Ogbonnaya Onu Polytechnic, Aba (still listed as Abia State Polytechnic on JAMB’s portal) has not published a separate cut-off for ND Quantity Surveying. Blog claims of “120 and above” are unofficial.

2027/2028 update: Abia Poly cut-off marks usually stay the same from one year to the next, so the figures on this page are what 2027/2028 candidates should plan with. They come from the latest official notice (2026/2027). If the 2027/2028 notice changes anything, we will update this page.

Quantity Surveying is on the course list in the polytechnic’s 2025/2026 ND/HND advert and on JAMB’s list for the school, so it is an established course. This page sets out the verified figures, a safe target score (my advice), the UTME subject combination, the O’level rules, screening, a worked example and the CAPS steps. Where Abia Poly has published nothing, I say so.


Abia Poly Quantity Surveying cut off mark 2027 at a glance

Item2026/2027 positionStatus
JAMB minimum UTME score for polytechnics100Official (JAMB 2026 policy meeting, reported by NAN on 11 May 2026)
Abia Poly departmental cut-off for Quantity SurveyingNot publishedNo official figure found for 2025/2026 or 2026/2027
“120 and above” figure seen on blogs120Unofficial (o3schools, 3 February 2026; no school notice cited)
Programme levelNational Diploma (ND), full timeND entry is through the UTME and JAMB CAPS
SchoolSchool of Environmental Design and TechnologyWikipedia, citing the JAMB brochure
UTME subjectsEnglish and any three of Physics, Mathematics, Geography, Economics and Biology/Agricultural ScienceJAMB polytechnic brochure as reprinted by Myschool; no Abia Poly remark
Screening fee and datesNot published officiallyCheck the polytechnic portal
Admission deadline set by JAMB31 December 2026 for polytechnicsOfficial (NAN, 11 May 2026)

On JAMB’s institution list the course appears as Quantity Surveying. Use that entry when you register.


Abia Poly Quantity Surveying cut off mark 2027 and earlier years

SessionFigureWhat it isStatus
2026/2027100JAMB national minimum for polytechnics and monotechnicsOfficial
2026/2027120“Scored up to 120 and above” on a blog’s Abia Poly screening postUnofficial
2025/2026100JAMB national minimum for polytechnicsOfficial (reported by Nairametrics, 8 July 2025)
Any yearNoneAbia Poly cut-off for Quantity Surveying specificallyNever published in any source I found

JAMB kept the polytechnic minimum at 100 in both 2025 and 2026. Abia Poly has not published a Quantity Surveying figure for any year, so the honest answer to “what is the cut-off” is JAMB’s 100 plus whatever the school’s screening shows.


Safe target score for Quantity Surveying at Abia Poly (my advice)

This table is my judgement as an admissions adviser. It is not an Abia Poly rule, and the school has not published merit lists with scores.

Your UTME scoreMy read for ND Quantity Surveying at Abia Poly
Below 100Not eligible for any ND course this session
100 to 119Eligible, but borderline
120 to 139Fair chance
140 to 159Good chance
160 and aboveStrong. This is the range I would aim for.

For the 2027 UTME I would aim for 140 or more. Quantity Surveying is one of the better known environmental courses, and the Art or Technical Drawing rule thins the field, so candidates who meet every line still compete for a limited number of places.

Catchment and state of origin

Abia Poly is owned by the Abia State Government, but it has not published a catchment list or a quota split for 2026/2027. It admits candidates from every state. I would not count on any indigene advantage unless the school’s own notice mentions one.


Abia Poly Quantity Surveying subject combination and O’level requirements

RequirementND Quantity Surveying
UTME subjects (JAMB wording)“Any three (3) of Physics, Mathematics, Geography, Economics, Biology/Agricultural Science” (plus Use of English)
My suggested UTME combinationEnglish, Mathematics, Physics and Economics
O’level (five credits, WAEC/NECO/NABTEB)Credits in Mathematics and Physics, plus any three of Economics/Commerce, Technical Drawing/Fine Arts, Chemistry, Geography, Further Mathematics, Woodwork, Biology, Religious Knowledge and Metal Work
English LanguageA credit is compulsory
Art or Technical DrawingThe brochure says a pass is required
Abia Poly remark in the brochureNone
Interview or practicalNone published

The UTME rule lets you choose any three of Physics, Mathematics, Geography, Economics and Biology/Agricultural Science, with Use of English on top. Chemistry is not on the list, so do not register it for this course. Abia Poly has no remark changing the rule.

My pick is English, Mathematics, Physics and Economics. Mathematics and Physics match the two fixed O’level credits, and Economics suits a course built around costs, budgets and contracts. Geography is a sound alternative to Economics.

At O’level you need five credits: Mathematics, Physics, and three from the list, with English Language a compulsory credit. The brochure also says a pass in Art or Technical Drawing is required. Many candidates miss this line. If you did neither subject, check with the department before you pay for the form.

The 2025/2026 advert reprint mentions “at least four (4) Passes” at SSCE or NECO before the text cuts off. JAMB’s brochure asks for five credits, so plan with five. Abia Poly has not said whether it accepts two sittings for this course. Several other polytechnics cap it at two in their brochure remarks, so confirm before you combine results.

Direct Entry and the HND route

There is no Direct Entry into the first year of an ND, and the brochure’s Direct Entry section for this course is empty. ND Quantity Surveying admission is through the UTME and CAPS. After the ND and one year of industrial attachment, you apply to the polytechnic directly for HND, outside CAPS.

For HND admission, a blog (schoolings.org, page updated 12 March 2026) reprinted a notice it credits to the polytechnic’s management: a ₦5,000 form, five O’level credits, an ND at Lower Credit or above, a one-year industrial attachment, and a screening test with no make-up date. I have not seen the original notice, so treat those details as unconfirmed.


How Abia Poly screening works

I could not find an official 2026/2027 screening notice from Abia Poly. Its website did not load for me, and Myschool, which usually reprints polytechnic adverts, has none for this session. What follows comes from the 2025/2026 advert reprinted by Myschool and from a blog description of the 2026/2027 form, so check every detail on the portal.

DetailWhat is knownStatus
Who can applyCandidates who chose Abia State Polytechnic in the UTME and scored at least the minimumJAMB rule; blog says first choice
Minimum UTME score100 (JAMB); some blogs say 120100 official; 120 unofficial
Eligibility line in 2025/2026 advert“At least four (4) Passes at SSCE/NECO level” (the reprint cuts off after this)Myschool reprint, 26 July 2025
PaymentGenerate an invoice on the portal and pay at a bankBlog (o3schools, 3 February 2026)
After paymentComplete the form, upload documents, print the acknowledgement and an exam slipBlog; suggests a screening test
FeeNot publishedUnknown
Aggregate formulaNot publishedUnknown

The exam slip in the blog description points to a written or computer test. Abia Poly has not said how it weighs that test against your UTME score, so prepare for it as you would for the UTME: English, Mathematics and your other subjects.

Worked example for an ND Quantity Surveying applicant

Abia Poly has not published an aggregate formula, so start with the margins. Take Kelechi, who scored 152 in English, Mathematics, Physics and Economics, with credits in English, Mathematics, Physics, Economics and Technical Drawing from one sitting.

  1. Eligibility: 152 minus 100 = 52. Well above JAMB’s minimum.
  2. Against the blog figure: 152 minus 120 = 32.
  3. Against my safe target: 152 minus 140 = 12. That puts Kelechi in the good-chance band.
  4. O’level check: English, Mathematics, Physics, Economics and Technical Drawing, all from one sitting and uploaded to CAPS.

Many Nigerian polytechnics rank candidates by a mix of UTME score and screening score. Purely to show how such a mix works, take the UTME score divided by 8 (out of 50) plus a screening score out of 50. Kelechi’s 152 gives 19, and a screening score of 30 out of 50 would make 49 out of 100. A candidate with 120 and the same screening score would have 45. This formula is an illustration only. Abia Poly has not published one.


Your chances of getting Quantity Surveying at Abia Poly

  • The Art or Technical Drawing pass at O’level is a real filter. Candidates who have it, plus credits in Mathematics, Physics and English, are in a stronger position than their UTME score alone suggests.
  • A UTME score in the 140s puts you in a good position.
  • If CAPS offers you Building Technology or Estate Management and Valuation instead, both are close cousins of Quantity Surveying on building projects.
  • JAMB asked polytechnics to finish 2026/2027 admissions by 31 December 2026, so offers can come late in the year. Keep checking CAPS.

Get the subjects right before you worry about the score. A candidate with a high score and a wrong UTME subject cannot be offered Quantity Surveying, while a candidate with a moderate score and every subject in place can.


How to apply for Quantity Surveying at Abia Poly, step by step

  1. Get your JAMB profile code: text NIN, a space and your 11-digit NIN to 55019 or 66019 from the phone line linked to your NIN.
  2. Register the UTME correctly: pick Quantity Surveying with English, Mathematics, Physics and Economics. JAMB still lists the school as Abia State Polytechnic, Aba, even though it was renamed Ogbonnaya Onu Polytechnic in November 2024.
  3. Fix your choice if needed: if Abia Poly was not your choice, do a JAMB change of institution before screening opens. To move into this course from another one, see JAMB change of course.
  4. Upload your O’level to CAPS: do this at a JAMB accredited centre. JAMB cannot offer you admission while CAPS shows no O’level result.
  5. Fill the screening form: on the Abia Poly applicant portal (portal.abiastatepolytechnic.edu.ng), generate the invoice, pay, complete the form, upload your documents, and print the acknowledgement and exam slip.
  6. Sit the screening: go with your slip, UTME result slip and O’level results if a test is held.
  7. Accept on CAPS: log in at efacility.jamb.gov.ng, open Check Admission Status, then Access my CAPS, and accept the offer. Our JAMB CAPS guide explains each status.
  8. Pay acceptance and clear: Abia Poly has not published its acceptance fee in any official source I reached. Pay only through an invoice generated on the school portal, then complete clearance.

Warning

Admission into Abia Poly comes through JAMB CAPS. If anyone offers you a “special list” slot or a “departmental slot” for money, walk away. A genuine offer shows on your CAPS page, and genuine school payments are made through an invoice generated in your name on the polytechnic portal.

If you still need to sit the UTME, read when JAMB 2027 registration starts, and when results come out, see how to check your JAMB result.


Studying Quantity Surveying at Abia Poly

ND Quantity Surveying sits in the School of Environmental Design and Technology. The course trains technicians who measure building work, price it, prepare bills of quantities and keep a project’s costs under control. The campus is on the Aba to Owerri Road, near the Enyimba International Stadium.

What you study

Abia Poly has not published a course outline online. The topics below are what an ND in this field normally covers under the national curriculum, so treat them as a guide.

  • Measurement of building and civil engineering work
  • Preparing bills of quantities and cost estimates
  • Building construction and materials
  • Contract procedure and tendering
  • Economics and accounting for construction
  • Technical drawing, computer applications and general studies

Duration and accreditation

Under the standard NBTE structure, the ND runs for two years full time. Students who want the HND then do a one-year industrial attachment (SIWES or IT) before applying, and the HND usually asks for an ND at Lower Credit or above. Abia Poly has not published a course-specific timetable, so treat this as the national pattern.

In 2022 the NBTE withdrew Abia State Polytechnic’s accreditation, and reports said students were barred from NYSC mobilisation. The Abia State Government announced on 1 September 2022 that accreditation had been restored after it released ₦450 million and held talks with the NBTE. I could not confirm the current NBTE status of ND Quantity Surveying itself, so ask the department, or check the NBTE’s list, before you pay fees.

Careers after the ND

  • Assistant quantity surveyor with consultancy firms
  • Estimator or cost clerk with building contractors
  • Procurement and works assistant in public offices
  • HND Quantity Surveying, then the route to registration with the Quantity Surveyors Registration Board of Nigeria (QSRBN) once you meet its rules

Professional registration rules change from time to time, so check the council’s current requirements before you plan your route.


Mistakes that cost Quantity Surveying applicants

  • Registering Chemistry in the UTME: it is not on the list for Quantity Surveying.
  • No pass in Art or Technical Drawing: the brochure says it is required.
  • No credit in Physics: Physics is a fixed O’level credit.
  • Forgetting the English credit: it is compulsory.
  • O’level missing on CAPS: JAMB cannot approve an offer without it.

Abia Poly Quantity Surveying: frequently asked questions

What are the JAMB subjects for Quantity Surveying in Abia Poly? Use of English plus any three of Physics, Mathematics, Geography, Economics and Biology/Agricultural Science. I would register Mathematics, Physics and Economics.

Is Chemistry required for Quantity Surveying in polytechnic? Not in the UTME. Chemistry is only an optional O’level credit for this course.

Do I need Technical Drawing for Quantity Surveying at Abia Poly? The JAMB brochure says an O’level pass in Art or Technical Drawing is required. A pass in either one meets the line.

Is 140 a good score for Quantity Surveying in Abia Poly? Yes. It is my safe target for this course and well above JAMB’s 100 minimum.


Sources and updates

The 100 minimum for polytechnics and the 31 December 2026 admission deadline come from the News Agency of Nigeria report of JAMB’s 2026 policy meeting (11 May 2026). The 2025 figure of 100 is from Nairametrics (8 July 2025) and matching Blueprint and AllAfrica reports. The UTME and O’level requirements are from JAMB’s polytechnic brochure as reprinted by Myschool (ND Quantity Surveying brochure page), which has no Abia Poly remark. The course list is from Ogbonnaya Onu Polytechnic’s 2025/2026 ND/HND admission advert reprinted by Myschool (26 July 2025) and the Myschool list of Abia State Polytechnic courses. The “120 and above” figure and the screening form steps are from o3schools (3 February 2026) and are unofficial. The HND details are from a schoolings.org reprint (12 March 2026) that I could not match to an original notice. The renaming to Ogbonnaya Onu Polytechnic on 7 November 2024 and the school’s location are from Wikipedia and news reports of the renaming. The 2022 accreditation withdrawal and restoration are from news reports and the Abia State Government (1 September 2022). The safe target scores and the worked example are my own advice. Checked on 29 October 2026; this page will be updated when Abia Poly publishes its 2027/2028 notice.

0 Shares:

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like