Adamawa Poly Cut-Off Mark for Building Technology 2027/2028

The Adamawa Poly cut off mark for Building Technology is 100 in the UTME, which is JAMB’s national minimum for polytechnics in both 2025/2026 and 2026/2027. Adamawa State Polytechnic, Yola has not published a separate cut-off for ND Building Technology, and I found no school notice that sets one. One more thing to know first: Building Technology is on JAMB’s course list for the polytechnic, but no Adamawa Poly admission notice I could find names it.

2027/2028 update: Adamawa Poly cut-off marks usually stay the same from one year to the next, so the figures on this page are what 2027/2028 candidates should plan with. They are based on JAMB’s 2026 national minimum for polytechnics, because Adamawa Poly has not published its own course cut-offs. If the 2027/2028 notice changes anything, we will update this page.

A score of 100 makes you eligible to be considered. It does not guarantee a place. Below you will find the verified figures, the last cut-off the polytechnic itself announced, a safe target score (my advice), the JAMB subject combination and O’level rules for Building Technology, what is known about screening, a worked example and the CAPS steps.

Adamawa Poly cut off mark for Building Technology at a glance

Does Adamawa Poly offer Building Technology?

Building Technology appears on Myschool’s reprint of JAMB’s course list for Adamawa State Polytechnic, Yola (18 courses, checked 3 November 2026). That is the list CAPS draws on, so it carries the most weight. Nothing else confirms it. The polytechnic’s admission adverts, as reprinted for 2019/2020 and 2022/2023, set entry rules without naming individual courses. The naija-find-uni course directory, an o3schools course list (25 November 2025) and Wikipedia’s list of the polytechnic’s courses all leave Building Technology out. The polytechnic’s website, adamawapoly.edu.ng, did not load during my checks.

So the course is on JAMB’s list, but no admission notice names it. It may be admitting without much publicity, or the listing may be older than the department’s current intake. I would count it as available only once you see Building Technology under Adamawa State Polytechnic, Yola on the JAMB e-brochure or your own CAPS page, and the polytechnic’s screening form lets you choose it.

Adamawa Poly Building Technology cut-off history

The 2019/2020 figure of 120 covered every ND course the polytechnic was admitting into that year. It is the only cut-off I could trace to Adamawa Poly itself, and it is now seven sessions old. JAMB has kept the national polytechnic floor at 100 since then, and Adamawa Poly’s later notices do not repeat a figure. Some blogs quote a higher “Adamawa Poly cut-off” without citing any notice; I would not plan around a number nobody can source.

Safe target score for Building Technology at Adamawa Poly (my advice)

This is my judgement as an admissions adviser. It is not an Adamawa Poly rule, and I found no published Adamawa Poly merit list with scores.

For the 2027 UTME I would aim for 130 or more. Building Technology usually draws fewer applicants than Civil Engineering Technology at the same polytechnic, even though the two lead to similar site work. Since no Adamawa Poly notice names the course, nobody outside the polytechnic knows its quota, so a margin above the old 120 figure is worth having.

Does state of origin matter?

Adamawa Poly is owned by the Adamawa State Government, but it has not published a catchment list or a quota split between indigenes and other candidates. I found no rule limiting ND admission to Adamawa indigenes. I would not count on any indigene advantage, or worry about lacking one, unless the polytechnic’s own notice mentions it.

Adamawa Poly Building Technology subject combination and O’level requirements

Mathematics and Physics are fixed. The fourth subject is Chemistry or Fine Arts, and nothing else. Most science students will take Chemistry. Fine Arts is the route for a candidate who studied art in place of Chemistry, which is rare for this course but allowed.

A few polytechnics accept Geography, Economics or Biology as the fourth UTME subject, but each has its own remark in the brochure. Adamawa Poly has none, so stick to Chemistry or Fine Arts.

The polytechnic’s own O’level rule

For Science and Technology programmes, the polytechnic’s admission advert (as reprinted by blogs) asks for a credit in Mathematics and at least a pass in English Language. The JAMB brochure is stricter: it makes a credit in English Language compulsory for Building Technology. Go with the brochure and get the English credit.

Direct Entry and the HND route

There is no Direct Entry into the first year of an ND. ND Building Technology admission goes through the UTME and CAPS. After the ND and a year of industrial attachment, you would apply for the HND directly to the polytechnic. The only HND list I found for Adamawa Poly (a blog reprint) names business courses alone, so I could not confirm an HND in Building Technology there. See our Adamawa Poly HND admission guide for what is known about HND entry.

How Adamawa Poly screening works

I could not find an official 2026/2027 screening notice from Adamawa Poly. What follows comes from blog reprints of the polytechnic’s admission advert, so treat every line as something to confirm on the portal.

When the form opens, check the course drop-down before you pay anything beyond the form fee. If Building Technology is missing there, take that as the polytechnic’s answer for the session.

Worked example for an ND Building Technology applicant

Adamawa Poly has not published an aggregate formula, so start by measuring how far your UTME score sits from the 100 minimum, from the old 120 figure and from a safe target. Take Musa, who scored 137 with English, Mathematics, Physics and Chemistry, and has credits in English, Mathematics, Physics, Chemistry, Technical Drawing and Woodwork across two sittings.

1. Eligibility: 137 minus 100 = 37. Musa clears JAMB’s minimum.
2. Against the 2019/2020 figure: 137 minus 120 = 17. Even if the polytechnic went back to 120, this score passes.
3. Against my safe target: 137 minus 130 = 7. He is above my safe target.
4. Subject check: Mathematics, Physics and Chemistry in the UTME; Mathematics, Physics and English credits, with Chemistry, Technical Drawing and Woodwork as the three extras. Two sittings is within the advert’s limit.
5. Course check: Building Technology shows under Adamawa State Polytechnic, Yola on his CAPS page. Without this, the rest does not matter.

Many Nigerian polytechnics rank candidates by a mix of UTME score and screening score. Purely to show how such a mix works, take the UTME score divided by 8 (out of 50) plus a screening score out of 50. A score of 137 gives about 17.13, and 30 out of 50 in screening would bring the total to about 47.13 out of 100. A candidate with 110 and the same screening score would have 43.75. This formula is an illustration only. Adamawa Poly has not published one.

Your chances of getting Building Technology at Adamawa Poly

• The first question is whether the course is admitting this session. Settle that on CAPS before anything else.
• If it is, a score of 130 or more with credits in Mathematics, Physics and English puts you in a good position.
• If the course is not open, Civil Engineering Technology at Adamawa Poly uses the same core subjects (with Chemistry) and appears on every course list I checked; Surveying and Geo-Informatics is another close fit.
• Federal Polytechnic Mubi, also in Adamawa State, runs ND Building Technology; see our Federal Poly Mubi Building Technology cut-off guide.
• JAMB set 31 December 2026 as the 2026/2027 deadline for polytechnics, so admissions for this cycle run until that date.

If you take Chemistry as your fourth UTME subject, you keep both Building Technology and Civil Engineering Technology open, which makes a change of course easy if one of them is not admitting.

How to apply for Building Technology at Adamawa Poly, step by step

1. Get your JAMB profile code: text NIN, a space and your 11-digit NIN to 55019 or 66019 from the phone line linked to your NIN.
2. Register the UTME with the right subjects: choose Building Technology with English, Mathematics, Physics and Chemistry (or Fine Arts).
3. Pick the right institution: choose Adamawa State Polytechnic, Yola as first choice. Do not pick the separate listing that ends in “affiliated to University of Maiduguri”; that one is for degree courses and follows university rules.
4. Confirm the course on CAPS: log in and check that Building Technology shows under the polytechnic. If Adamawa Poly was not your first choice, do a JAMB change of institution before screening. If the course is missing, a JAMB change of course to a listed course protects your chance.
5. Upload your O’level to CAPS: do this at a JAMB accredited centre. JAMB cannot process an admission while CAPS shows no O’level result.
6. Fill the screening form: when the polytechnic opens its form, pay the fee shown on the official portal, fill the form and print the acknowledgement and screening slips. Blogs give the fee as ₦2,000 and the portal as spy.admissions.cloud; both are unverified, so check the address against an official Adamawa Poly notice first.
7. Sit the screening: go on the date on your slip, with both slips, your UTME result slip and your O’level results.
8. Accept on CAPS: log in at efacility.jamb.gov.ng, open Check Admission Status, then Access my CAPS, and accept the offer. Our JAMB CAPS guide explains each status.
9. Pay acceptance and clear: Adamawa Poly has not published its acceptance fee in any official source I reached. Pay only through an invoice from the polytechnic’s portal, then complete clearance.

If you still need to sit the UTME, read when JAMB 2027 registration starts, and when results come out, see how to check your JAMB result. For revision, see our JAMB Chemistry syllabus.

Studying Building Technology at Adamawa Poly

ND Building Technology trains technicians who supervise construction on site, read and prepare working drawings, and check that materials and workmanship meet standard. Adamawa Poly has not published which campus or school would run it.

What you study

• Building construction and site practice
• Building materials and their testing
• Building drawing and technical drawing
• Basic structures and soil studies
• Building services such as plumbing and electrical layouts
• Measurement, estimating and site surveying
• Communication in English and general studies

Duration and accreditation

Under the standard NBTE structure, the ND runs for two years full time. Students who want the HND then do a one-year industrial attachment before applying, and the HND usually asks for an ND at Lower Credit or above. Adamawa Poly has not published a course outline for Building Technology, so treat this as the national pattern.

Adamawa Poly is a state polytechnic under the NBTE. I could not confirm the NBTE accreditation status of ND Building Technology there, or that the department is currently admitting. Ask the polytechnic, or check the NBTE’s list of accredited programmes, before you pay school fees.

Careers after the ND

• Site supervisor or foreman with building contractors
• Works and building control departments of local and state government
• Materials and quality control assistant on construction projects
• HND Building Technology, or a degree in Building for those who want to become professional builders

Related Adamawa Poly courses

• Adamawa Poly Architectural Technology cut-off mark
• Adamawa Poly cut-off mark for Civil Engineering Technology
• Adamawa Poly Surveying and Geo-Informatics cut-off mark
• Does Adamawa Poly offer Quantity Surveying?

Mistakes that cost Building Technology applicants a place at Adamawa Poly

• Assuming the course is open: it is on JAMB’s list, but no admission notice names it. Check CAPS and the screening form.
• Taking Geography or Economics in the UTME: only Chemistry or Fine Arts can join Mathematics and Physics.
• No English credit: the brochure makes it compulsory.
• No O’level on CAPS: your admission cannot be processed.

Adamawa Poly Building Technology cut-off: frequently asked questions

What is the cut off mark for Building Technology in Adamawa Poly? The minimum is JAMB’s 100 for polytechnics; Adamawa Poly has published no course figure. I suggest aiming for 130 or more.

Is Building Technology offered at Adamawa State Polytechnic? It is on JAMB’s course list for the polytechnic, but no Adamawa Poly admission notice names it. Confirm it on your CAPS page and on the screening form before paying.

What are the JAMB subjects for Building Technology in polytechnic? English, Mathematics, Physics and either Chemistry or Fine Arts.

Is Chemistry compulsory for Building Technology? Not strictly. In the UTME you can take Fine Arts instead, and at O’level Chemistry is one of several options after Mathematics, Physics and English.

Sources and updates

The 100 minimum for polytechnics and the 31 December 2026 admission deadline come from the News Agency of Nigeria report of JAMB’s 2026 policy meeting (11 May 2026). The 2025 figure of 100 is from Nairametrics (8 July 2025) and matching Blueprint and AllAfrica reports. The UTME and O’level requirements are from JAMB’s polytechnic brochure as reprinted by Myschool (ND Building Technology brochure page), checked on 3 November 2026. That page carries no remark for Adamawa Poly. The course listing is from the Myschool list of Adamawa State Polytechnic courses; the naija-find-uni directory, o3schools (25 November 2025) and Wikipedia do not list the course. The 120 cut-off for 2019/2020 is from Myschool’s reprint of the polytechnic’s notice (15 July 2019), and the 2022/2023 entry rules are from Myschool’s reprint of the ND advert (8 September 2022). The screening fee, portal and test rules are from schoolings.org (page modified 12 March 2026) and remain unverified. The safe target scores and the worked example are my own advice. Checked on 3 November 2026; this page will be updated when Adamawa Poly publishes its 2027/2028 notice or confirms the course.

Jude Chinecherem

I am Jude Chinecherem, a final-year MBBS student at the University of Nigeria, Nsukka. I know what it feels like to want an education your family cannot afford. When my parents could not pay for my schooling, I had to learn how to find scholarships and work the system out on my own, with nobody to guide me. I came out the other side, and now I share everything I learned so the next student does not have to figure it out alone. This is the advice I wish someone had given me back then.